Loading... Please wait...
  • PED4-Coil-CH50 Portrait
  • PED4-Coil-CH50 Landscape
  • PED4-CH50 iPhone Tripod Mount
  • PED4-CH50 iPhone Tripod Mount
  • PED4-CH50 iPhone Tripod Mount
  • PED4-Coil-CH50 Coat Hanging
  • PED4-Coil-CH50 Pitch Yaw Roll
  • PED4-Coil-CH50 Pitch Yaw Roll
  • PED4-Coil-CH50 Shown with iPod touch 5 generation with no case
  • PED4-Coil-CH50 coiled up for travel
  • PED4-Coil-CH50 Shown next to a 12 inch ruler
  • PED4-Coil-CH50 empty

PED4 Coil CH50 - iPhone Flexible Stand

MSP: $44.99 (You save $10.00)
$34.99
Add to Cart Below

Product Information

iPhone Flexible Stand

Gooseneck & Pivoting Holder

PED4 Coil CH50

The iPhone flexible stand, PED4 Coil CH50 is a pivoting, case adjustable, 36" long holder mount. With or without a case or skin, you can configure the sliding fingers to fit your iPhone. The solid stainless steel ball allows you to orientate the holder into any position you desire. The 36" gooseneck coil can be manipulated into just about any shape you can imagine.

iPhone Flexible Gooseneck Holder

Wrap it up

Any way you want, it will do it

The 3 foot soft flexible coil is slender yet exclusively designed* for secure form-able positioning. With small coiling abilities, it is compact enough for travel and is a great solution for those long flights, and yes it does nicely wrap around the back of your neck for hands free entertainment.

iPhone Flexible Gooseneck Pivoting

Pivot

Roll, spin, turn, rotate, pitch, yaw....

Whatever you call it, the PED4 Coil CH50 mount stand can be positioned to it. Using the solid 9/16" diameter steel ball and socket technology you will feel the smooth pivoting freedom to any position you desire. (Friction screw adjustable)

iPhone holder easy in and out

Case or Bare

Engineered to be used daily

The PED4 Coil CH50 flexible gooseneck iPhone stand mount has user configurable sliding fingers that are also slightly flexible to create a pre-load to hold the iPhone. This flexibility allows the mount to be used with or without a case efficiently, while securely holding the iPhone as your hand would. Once the holder is configured to your desired fit, there are no special procedures needed, the iPhone installation and removal is instantaneous. All of the controls, ports and camera are fully accessible at all times.
12 inch tall iPhone Stand

Size Does Matter

Easily create a greater than 12" stand and travel too

The 36 inch coil can be creatively shaped to endless uses while giving you the ability to condense it down for easy travel. Pack it for a trip and instantly display your iPhone in seconds.

 

Works with Olloclip

3-In-One iPhone Photo Lens

 

The premium quality, case adjustability and portability of this flexible gooseneck iPhone stand mount will set your hands free. 

Proudly made in Connecticut, USA from solid steel, twisted steel core, polymer and heat resistant polymer materials.

FEATURES:

  • 3 slide adjusting fingers (vinyl protected for the iPhone)
  • 2 slide adjusting guides
  • 9/16" solid steel ball for fluid pivoting action (Friction screw adjustable)
    • Roll: ∞ infinite (when device is parallel to support shaft there is an index for the rotation of portrait and landscape)
    • Yaw: ∞ infinite (left to right)
    • Pitch: >180˚ (front to back)
  • 36" x 5/16" diameter vinyl wrapped flexible gooseneck coil
  • Artistic shape and design
  • Portable
  • Full control, port and camera access
  • Color:  Black

HOLDER COMPATIBILITY:

  • Designed for iPhone 5S, 5C, 5 with or without a case, skin, bumper or protective cover.
  • Designed for iPod touch 5g with or without a case, skin, bumper or protective cover.
  • Works with large cases like OtterBox Defender, Commuter, and many more - see dimensions below.
  • Other devices including a cased iPhone 4S, 4, 3GS, 3G and Original, iPod touch 4g, 3g, 2g and 1g if your case is within the dimensions below.
    • Width: From 2.15" to 2.75"
    • Height: From 4.65" to 5.3"
    • Depth: Slide finger is .6" tall (The depth of your case can be deeper than this dimension)
Notes:
Belt clip should be removed to work with holder.
PED4 series and PED3 series products are not interchangeable with one another.
 
SPECIFICATIONS:
ITEMS INCLUDED:
  • 36" x 5/16" diameter vinyl wrapped flexible gooseneck coil and steel ball
  • CH50 Adjustable Holder Assembly
  • T-Wrench 5/64" (torque limiting)
  • 3/32" Allen wrench

 RECOMMENDED ACCESSORIES:

  • Devil Head - Headphone Wrap and Wrench or simply use your own 11/16" open ended or adjustable wrench.
Devil Head - Headphone Wrap and Wrench

INSTRUCTIONS:

  • Click here to download (Coming soon)

WHAT OTHERS ARE SAYING:

iLounge "We’ve tested goosenecks that didn’t have the proper level of tension to hold the weight of the device they’re designed to cradle, but thankfully, Thought Out got it right"...

iPhone, case, lens, coat, & coat tree not included

PED4™ is a trademark of Thought Out Company

Find Similar by Category


Product Reviews

Write your own product review

  1. perfect for my needs

    Posted by Kelly Grace on 8th Aug 2013

    I wanted something that could hold my phone up while on a plane to watch TV on. This product not only does that but I have it on my desk at work so my phone is readliy available to me. It's sturdy and well made. I'd say Thought Out is the perfect name for this company!! Thank you!


Rating:
Availability:
Usually ship within 24 hours
Gift Wrapping:
Options available




News

Sign up to our newsletter


Payments methods we accept: American Express, Visa, Mastercard, Discover, Paypal and Google Checkout Amazon Payments