Loading... Please wait...
  • PED4 Living Finger Kit & Tool
  • Once configured the Living Fingers allow just the right amount of grip and flex for easy in, and easy out of the holder functionality.

PED4 Living Finger Kit & Tool

$4.99
Add to Cart Below

Product Information

PED4 Living Fingers (6) and Tool

Replacement Living Fingers for PED4 product line

The configurable, sliding, living finger (springy finger) and screw is a proven design feature, which is a replaceable item, should excessive use, forceful use, or incorrect use be presented. With correct usage you should achieve many years of reliable use.

WARNING - DO NOT REMOVE SCREWS - DO NOT OVER TIGHTEN

Replacement PED4 CH Guides can be found here

PED4 Extension Living Fingers can be found here

 

INSTRUCTIONS FOR HOLDERS WITH EXISTING LIVING FINGERS IN PLACE (NEW PRODUCTS):

Do not remove the living finger from the holder, only do so if necessary, for instance due to replacement. (see below for instructions) 

Using the limiting torque wrench provided with your holder, it is important to not over torque the living finger. While looking at the screw it is important to LOOSEN the screw only a quarter of a turn COUNTER CLOCKWISE, make your adjustment by sliding the living finger in the slot, and then using the supplied limited torque wrench, turn the screw CLOCKWISE LIGHTLY to TIGHTEN. The amount of torque to hold the living finger in place is very minimal.

Never use a standard allen or hex key as too much force created from these tools may strip the threads in the living finger.

 

INSTRUCTIONS FOR REPLACING LIVING FINGERS:

With the worn living finger removed, place the new living finger in the slot with the screw removed, and hold in place with your finger in one hand. With you opposite hand, roughly place the screw in the slot on the opposite side of the living finger. It does not have to be in the screw hole yet, grab with your opposite hand the limiting torque 5/64" hex key wrench (small tool) and match up to the screw head. From here it should be very easy to find the screw hole while turning the wrench CLOCKWISE and LIGHTLY TIGHTEN with the living finger in the closed position. Now complete as necessary in other locations. Once all living fingers are replaced, you can then move on to the next procedure of configuring it to your bare or cased device.    

While looking at the screw it is important to LOOSEN the screw only a quarter of a turn COUNTER CLOCKWISE, make your adjustment by sliding the living finger in the slot, and then using the supplied limited torque wrench, turn the screw CLOCKWISE LIGHTLY to TIGHTEN. The amount of torque to hold the living finger in place is very minimal.

Never use a standard allen or hex key as too much force created from these tools may strip the threads in the living finger.

 

Videos

Living Finger Explanation & Proper Use (01:58)
Living Finger Explanation & Proper Use How to properly setup your living finger to a bare or cased device. For more information please see the living finger webpage at http://www.thoughtout.biz/ped4-living-finger-kit-tool/
  • Living Finger Explanation & Proper Use
    Living Finger Explanation & Proper Use How to properly setup ...

Find Similar by Category


Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

$4.99




News

Sign up to our newsletter


Payments methods we accept: American Express, Visa, Mastercard, Discover, Paypal and Google Checkout Amazon Payments